Product image
Vision Systems

Steel Inspection

Machine Vision for Steel Inspection

The steelworks environment calls for well planned installation. Normally the cameras can be installed at a good distance from the red hot steel, where there is easy access. If the cameras need to be close to the products, a number of different protection techniques are employed. Radiation shields, water cooled camera housings etc.  

JLI have developed solutions for steelworks since 1987. We have many installations, some in service after more than 20 years. 

The systems cover a broad range of applications.  

  • Alpha Numeric Readers on hot and cold steel
  • Dimensional measurements
  • Position
  • Shape identification
  • Volume and weight
  • Surface inspection on sections
  • Product lengths on cooling bed, Rebar and Rails 

Alpha numeric readers are used to track products and ensure that the right steel is processed and delivered to the right customer. 

Dimensional measurements are done on hot and cold products. The accuracy can be impressive and exceed the standard methods.

One of the first systems measured position of git end or fishtail at Bloom cropping. The measurements were used to optimize the discard calculated from bloom length. As the mill produce titanium steel the saving when discarding correctly meant a payback time of 14 days. 

Slab dimensions can be measured accurately just before rolling. This ensures that it is the right slab for the rolling programme. A wrong (too thick) slab can cause expensive damage to the mill. These systems are normally mounted on the lighting walkway or on the roof where they are well away from the hot steel. 

Rails are now produced in lengths over 100 meters. To inspect the rail surface the operator walks up and down the entire length. This means walking a distance of more than 10 miles on an 8 hour shift. The need for automation was clear.

The JLI system uses 6 cameras mounted on a ring with flood lights. This gives a full coverage of rails and beams.

The first system was installed in 2009. JLI is now developing Machine Learning to fully automate fault detection.

JLI Steelworks Inspection Systems are custom designed turnkey solutions for measuring dimensions, shapes, surface defects and flatness in both the hot and cold end. All equipment is designed for the relevent environment. This can include water cooled and air blown camera housings suitable for operation at temperatures exceeding 200oC.

General features/benefits of JLI turnkey systems include:

  • Custom made
  • Adapted to existing production lines
  • Internet connectionExcellent reliability track records
  • Special applications

New call-to-action